With over 10,000 packages sold and no reported failures, we are confident that the Safe-T-Plex RV Roof Coating System is one of the best in the industry. Because we use only superior ingredients, our product is not the least expensive on the market, however, if a durable, lasting, maintenance-free roof surface is what you are looking for, consider investing a little extra to get the ultimate in roof protection. We have 23 years experience in the manufacture of rv roof restoration products - we know what works!
CALL TOLL FREE 1-855-792-0500 - USA & CANADA
WE SHIP ALL OVER NORTH AMERICA
TAPE-KOTE SEAM TAPE & SAFE-T-PLEX RV COATING = NO MORE LEAKS, GUARANTEED!!
Safe-T-Plex Elastomeric Roof Coating is a high solids acrylic elastomer coating system with superior weatherability, ultraviolet resistance, fire retardancy, elongation, flexibility and adhesion. This specially formulated product is made to contract, expand and flex, and is guaranteed not to crack so as to maintain a permanent water tight vapor barrier. Safe-T-Plex produces a bright white, 92% reflective surface, which effectively reduces cooling costs and heat stress to your roof structure. The product's low dirt pick up and sealing feature will drastically reduce unsightly streaks that are so hard to remove from trailer and motorhome siding.
Tape-Kote Roof Seam Tape is a peel and stick product for sealing joints and seams from migrating moisture. It is ideal for mobile homes, manufactured housing, camper trailers, motorhomes, utility trailers, metal buildings, and semi-trailers, prior to application of Safe-T-Plex Elastomeric Roof Coating. Tape-Kote provides truly amazing adhesion - it must be destroyed in order to remove it, and destroying it is not an easy job.
Tape-Kote Roof Seam Tape is manufactured from specially formulated elastomeric resins, bonded to a woven polymer fiber for maximum conformability. After the seam tape is applied, Safe-T-Plex Roof Coating bonds permanently to this woven backing, forming an integral, waterproof membrane that remains flexible and will not crack, even in freezing temperature conditions.
Tape-Kote Seam Tape over joints and around roof vents, followed by two coats of Safe-T-Plex is like covering your roof with a pond liner. Safe-T-Plex flows where water goes, and then sets up like a rubber tire to prevent further leaks. Scroll down to the bottom of this page to read testimonials from our customers. Click here for testimonials from our customers.
If these products are applied properly, you can expect to have a maintenance free roof for at least 20 years.
Our Safe-T-Plex/ Tape-Kote System is guaranteed against leaks for 10 years if applied according to our instructions.
Please read the full procedure below on "HOW TO REPAIR YOUR RV ROOF" before ordering your material.
Tape-Kote 4" RV Roof Seal Tape
PolyPro Deep Pile Roller
Safe-T-Plex RV Elastomeric Roof
Safe-T-Prime #522 Primer for EPDM RV Rubber Roofing
Before ordering, determine if your roof is aluminum, fiberglass, steel or rubber sheeting. Measure all seams including the outside edges, cross seams and around all vents, pipes or air conditioners. These seams must be covered with Tape-Kote Roof Seal Tape before coating and we need to know how many feet of tape you will need. If you wish to repair pushouts, measure these as well.
PREPARING A RUBBER ROOF (EPDM)
Pressure wash or scrub rubber surface with deck brush, warm water and detergent. Remove any loose coatings or sealants that are not adhering well to the roof. Flush clean and allow to dry. Immediately after cleaning, apply tape to all seams. Remove about 2" of the liner from the tape and press it down at your starting position. Pull the liner from underneath and press the tape as you go, gradually releasing the liner so that the adhesive surface does not come in contact with itself or unintended surfaces. Using a 4 or 5" nylon brush, apply a very thin coating of Safe-T-Prime EPDM Roof Primer to the rubber surface to prevent any further oxidization. Do not apply heavily and do not use a Safe-T-Plex roller to apply this product or it will bubble and crack. Allow primer to dry 2 - 3 hours (dry to touch but slightly tacky) before coating with Safe-T-Plex RV Roof Coating.
APPLYING TAPE-KOTE ROOF SEAM TAPE
PREPARING A METAL ROOF
Aluminum and steel roofing requires power washing or scrubbing with water and detergent.. Remove any loose coatings, silicone or sealants that are not adhering well to the roof. Apply tape to all seams. Remove about 2" of the liner from the tape and press it down at your starting position. Pull the liner from underneath and press the tape as you go, gradually releasing the liner so that the adhesive surface does not come in contact with itself or unintended surfaces.
PREPARING A FIBERGLASS OR VINYL ROOF
Sand roof using 100 grit paper to remove all shine from the surface. Wipe clean with a damp cloth and allow to dry. Apply tape to all seams. Remove about 2" of the liner from the tape and press it down at your starting position. Pull the liner from underneath and press the tape as you go, gradually releasing the liner so that the adhesive surface does not come in contact with itself or unintended surfaces.
APPLYING SAFE-T-PLEX ROOF COATING
Safe-T-Plex should not be applied below 10°C (50°F) or if frost, rain or heavy dew is anticipated within 12 hours after application. Remember that Safe-T-Plex is a "coating" not a "paint" and therefore must be applied liberally. Apply using a long nap Safe-T-Plex roller, in two coats at 90 degrees to each other, allowing approx. 3 hours cure time between coats. Make sure all the tape is well coated. If you are concerned about too much walking on the roof structure, lay on it instead and use a brush to paint over the tape around vents etc. Use a broom handle on the roller to reach across the roof from either side to finish coating the surface. Safe-T-Plex will be completely cured over night and will be ready for years of trouble-free protection.
or email us to order!
BEFORE YOU CALL, WE NEED TO KNOW:
(1) What roof surface is on your rv (rubber, aluminum, fiberglass, etc)
(2) Length and width of your rv roof (include push outs if applicable)
(3) How many feet of seams including around vents, pipes, a/c units, etc.
(4) Your address & zip (postal) code so we can quote correct shipping cost
Call Us Toll Free: 1-855-792-0500
or click to email: firstname.lastname@example.org
WE ARE HERE TO HELP! CALL US WITH YOUR QUESTIONS!
USA WAREHOUSE: 438 WESTRIDGE PARKWAY, BLDG. 100
MCDONOUGH, GA 30253
CANADIAN PLANT: 324 SAUNDERS ROAD, UNIT 8
BARRIE, ONTARIO L4N 9Y2
TOLL FREE (USA & CANADA) 1-855-792-0500
TOLL FREE FAX 1-877-411-6866
EMAIL ADDRESS email@example.com
Hours of Operation 8:30 AM—4:30 EST
Monday to Friday
We had serious leak problems with our
rubber roof on our motorhome and were told by the dealer that we needed
a new epdm rubber membrane. My wife and I taped and coated the roof in
just one weekend using your products. That was twelve years ago and we
have had absolutely no problems since. We are trading in our old
motorhome, and will coat the new one right away as a preventative
measure. I highly recommend the Safe-T-Plex products. The folks at
Brentwood are great to deal with.
Webster - Haines City, FL
Just got off the phone with the factory. I'm telling you these folks are fantastic to work with. Clean up of this product is with water. Beauty! I know there are cheaper products out there and many ways it can be done, however, for $382.99 it seemed to be the best and least of all options. It's a one time deal for 20 years. Not to mention the Company support is incredible. Any time I had a question and called the company they couldn't do enough to help out. You don't see that very often these days.
T.J. Lilliman – Straffordville, ONI ordered your RV roof coating system for my Jayco tent trailer and I just want to give you a huge thanks. Your company’s product is truly awesome, the roof of my trailer looks brand new and after applying that crazy tape I feel confident that I will be free from leaks for a long time. Furthermore I just want to personally thank you. You were a pleasure to deal with and you had my order sitting on my door step less than 24 hours after I had placed the order which impressed the heck out of me. Thanks again and you have yourself a fine day.
David Allison – Kitchener, ON
Thank you so much for the effort that you put forth and the special attention that you gave my "little" order. Since it is supposed to last for 15 or 20 years, I don't suppose that I will have call to be needing it again for a while, but I will certainly be happy to recommend y'all to anyone I meet with similar problems.
Randy Chambers – Adairsville, GA
DO YOU NEED A PROFESSIONAL
APPLICATOR TO RESTORE YOUR ROOF?
Applicators in Florida, USA
Never Leak RV Roofing, Jensen Beach, FL 34957 Tel: (772) 341-1742
Applicators in Ontario, Canada
Enviro-Tech Coatings, Palmerston, Ontario Tel: (519) 998-3330
Tite Polymer Roofing,
Wilberforce, Ontario Tel: (705) 448-9692
Yes We Do,
Wasaga Beach, Ontario Tel:
Campground, Mallorytown, Ontario Tel:
Preston Molloy, Arnaud, Manitoba, R0A 0B0 Tel: (204) 960-2855
Distributor/Applicator in the United Kingdom
Swanbrook Bus Park, Golden Valley, Staverton,
Cheltenham, Glos. GL51 OTE
Tel: (01452) 856856
Mobile: 07791 130888